|
型号：压片机ZP17
本机用以将各种颗粒状原料压制成圆形片剂，最适合于小批量生产，其特点是转盘上可装17付冲 模，旋转一周即可压制17片。转盘速度，物料的充填深度、压片厚度均可调节。机上的机械缓冲装置可避免过载而引起的几件损坏。机体一侧配有吸粉箱，通过吸沮可吸取机器运转时产生的粉尘，避免粘结堵塞。
本机曾获国家医药管理局优质产品将。
This machine is applied to press all kinds of particle material into round tablets an especially caters for production of small quantity.It is featured that 17 pairs of dies may be mounted to the turet,so 17 tablets can be pressed at only one turn.Turret speed,filling depth of material and tablet thickness all are adjustable.The mechanical snubber device on the machine may prevent damage to parts caused by overload.Power-absorbing box is installed to one side of the machine.It may absorb the powder from the operation of the machine via suction port to avoid bnding and clogging.
This machine was awarded High Quality Product issued by State Medicine Administrative Bureau of China.
主要技术参数 MAIN TECHNICAL SPECIFICATIONS
冲模数 DIES 17sets付
最大压片压力 MAX.PRESSURE 50KN千牛
最大压片直径 MAX.DIA OF TABLET 20mm毫米
最大充填深度 MAX.EDPHTH OF FILL 15mm毫米
最大片剂厚度 MAX.THICKNESS OF TABLET 6mm毫米
转台速度 TURRET SPEED 20-40r/min转/分
最大生产能力 PRODUCTION CAPACITY 20000-40000pc/h片/时
电机 MOTOR 2.2KW、960r/min、380V/50HZ千瓦、转/分、伏50赫
外形尺寸 OVERALL SIZE 880×750×1600mm毫米
主机重量 NET WELGHT 560kg千克
| |
 |
| |
| |
|
|
|
